Skip to content
← All guides

Log zincs on a dive

After the dive, rate each zinc and log any you replaced. The owner sees the report.

1:28 video · 12 steps

New here? Start with Check in and out.

  1. Step 1 of 12

    Tap Stop Job after the dive

    Your dive shows Bottom Service. Stop Job opens the zinc check.

    • A YES by text closes the dive with no zinc report. Use the app.
    9:41▮▮▮ ⏻
    ‹KEEL works
    Job in progress
    ⏱
    00:47:05
    Started 9:12 AM
    DREAM
    Bottom Service / Zinc Inspection
    Bayside Marina · Slip B405
    $150
    on completion
    Stop Job
  2. Step 2 of 12

    Rate each zinc you checked

    Six spots, always the same. Pick GOOD, WATCH or REPLACE.

    Bottom Service · Inspección de Zinc
    Zinc Inspection
    Log each zinc. Mark replaced if swapped out.
    Registra cada zinc. Marca si fue reemplazado.
    ShaftREPLACED?
    goodwatchreplace
    RudderREPLACED?
    goodwatchreplace
    HullREPLACED?
    good
    watch
    replace
    Who sees this report?

    The owner. It is saved to the boat's KEEL Record and shows in the owner's app, so rate what you actually saw.

  3. Step 3 of 12

    Mark the zincs you replaced

    Tap REPLACED? on that row. It turns gold: REPLACED ✓.

    ShaftREPLACED ✓
    Trim TabsREPLACED?
    goodwatchreplace
    Prop
    REPLACED?
    goodwatchreplace
  4. Step 4 of 12

    Tap Continue at the bottom

    A row you skip shows a dash on the next screen.

    Trim TabsREPLACED?
    goodwatchreplace
    PropREPLACED ✓
    Bow ThrusterREPLACED?
    goodwatchreplace
    Continue
  5. Step 5 of 12

    Check the Dive Summary

    This is the report the owner gets. Go back to fix it.

    DREAM · Bottom Service
    Dive Summary
    Zinc Report
    ShaftReplaced
    RudderGood
    HullWatch
    Trim TabsGood
    PropReplaced
    Bow Thruster—
    This Visit
    2
    Replaced
    2
    Good
    1
    Watch
    0
    To replace
  6. Step 6 of 12

    Enter the price for all anodes

    Price is the total for all anodes, not each one.

    • Only shows if you marked a zinc REPLACED ✓.
    • No charge? Leave both fields empty.
    Anode charge
    What you are charging for the anodes you fitted. Added to this job.
    How many
    2
    Price ($)
    140
    2 anodes · $140.00
    Does the owner approve the anode charge?

    No. It is added to this job automatically, and the owner sees it with your zinc report. The gold line under the fields is exactly what will be billed.

  7. Step 7 of 12

    Tap Clock Out

    A red message names a missing field. Fix it, then tap again.

    Anode charge
    What you are charging for the anodes you fitted. Added to this job.
    How many
    2
    Price ($)
    140
    2 anodes · $140.00
    → Logged to KEEL Record. The owner sees this report.
    Clock Out
  8. Step 8 of 12

    Check the new Total

    Clock Out adds your anodes to the rate and shows the Total.

    ‹
    DREAM · Finishing Up
    Clock Out
    Summary
    Clock In9:12 AM
    Clock Out10:05 AM
    Duration53 min
    Payment Amount$150.00
    Anodes · 2$140.00
    Total$290.00
    ✓
    Location Verified
    Ready to clock out
  9. Step 9 of 12

    Take one photo from the dive

    Anodes, growth or hull. The job cannot finish without it.

    Add photos
    One photo from the dive - the anodes, growth, or the hull. Needed to finish the job.
    Take photo
  10. Step 10 of 12

    Allow the camera

    Your phone asks only the first time you take a photo.

    9:41▮▮▮ ⏻
    ‹
    DREAM · Finishing Up
    Clock Out
    Summary
    Clock In9:12 AM
    Clock Out9:50 AM
    Duration38 min
    Payment Amount$100.00
    Add photos
    One photo of the work you finished. Needed to finish the job.
    Take photo
    “KEEL Works” Would Like to Access the Camera
    KEEL Works uses your camera to photograph your vessel and document issues, repairs, and inspections.
    Don't Allow
    Allow
  11. Step 11 of 12

    Tap Confirm & Get Paid

    The button lights up once your photo shows.

    Add photos · 1 photo
    One photo from the dive - the anodes, growth, or the hull. Needed to finish the job.
    Remove
    Take photo
    Confirm & Get Paid
  12. Step 12 of 12

    See the full amount

    Job Submitted shows your rate plus the anodes.

    Job Submitted
    $290
    Payment is processed 24 hours after clock-out

The owner gets your zinc report, and the anodes are paid with the job.

These are the real screens. Anything in a box is exactly what you'll see.